Attach projector ceiling mount directly to a
structural ceiling with appropriate hardware (lag bolts) +/-
20° tilt +/- 10°
pitch (8" x 6" x 2")
Use the FEC__ mount PLMT
A series pole with the PLMT-T Top Pan (12" x 12" x 2")
Attach the PLMT-CP to the ceiling, then the
FEC-___ mount to the PLMT-CP
(6"x 6" x 2")
3/8" Threaded Rod FEC-
Strut Mount PLMT-U
Ceiling Tile Panel CTP-2x2
Attach to the (4) corner holes of the FEC-___
Projector Ceiling Mount (3/8" x desired length)
Attach to structural channel, i.e. UniStrut
or PowerStrut type material (2"x6"x2")
Replaces a 2' x 2' grid tile or hangs just
above the tile from support wires to the CTP-2x2. Support
wires, turnbuckles and (2) J-boxes for signal and power are
included. This Ceiling Tile Panel is the most versatile on
the market.
C-Clamp Mount PLMT-C
Angled Ceiling Mount PLMT-AA
This fitting attaches to structural truss or
pipe with a female 2" NPT collar
(3" x 3" x 9" with clamp)
Attach to a PLMT-A series pole and FEC-____.
The PLMT-AA is adjustable to 0° to 90°
based on ceiling pitch
(6.3" x 6.3" x 8.0")
