| |
Model # |
Flat Panel Display Mounts |
List |
|
Wall Mounts |
| |
PWM-9116-XXX |
Flat Panel Wall Mount. System includes
mounting rails and flat panel mount. Specify display make
and model |
$ 235.00
|
| |
PWM-T-9117-XXX |
Flat Panel Wall Mount with Tilt. System
includes mounting rails, tilt assembly and flat panel mount.
Specify display make and model |
$ 345.00
|
 |
PLMT-WA |
Pole Mount Wall Arm. Arm mounts to wall
provided with 2" threaded collar. Mounts displays 7" from
wall. Requires pole and SPD/DPD to complete system. |
$ 98.00
|
| Pole Mounts: Lower Components |
 |
SPD-9118-XXX |
Single Panel Display Pole Mount
assembly. Provides threaded collar for 2" pole with +/-15°
tilt and includes flat panel mount. Landscape or Portrait
mode. Requires pole and PLMT-T / AA / CTP-2X2 / to complete
system. |
$
390.00 |
 |
DPD-9119-XXX |
Dual Panel Display Pole Mount assembly.
Provides threaded collar for 2" pole with +/-15° tilt and
includes (2) panel mounts. Landscape or Portrait mode. .
Requires pole and PLMT-T / AA / CTP-2X2 / to complete
system. |
$ 635.00
|
|
Pole Mount Upper Components |
 |
CTP-2x2 |
Ceiling Tile Panel for stationary
mounting of projectors and PDP's. Provides versatile
mounting positions in 2 ft. X 2 ft. drop tile. Requires
pole and SPD/DPD to complete system. |
$ 195.00
|
 |
PLMT-T |
Pole Mount Top Panel. Mounting Panel
with threaded collar for 2" pole. Attaches to structural
ceiling. Requires SPD/DPD and pole to complete system. |
$ 71.00
|
 |
PLMT-AA |
Pole Mount Angle Adapter. Angled
mounting panel with threaded collar for 2" pole. For
cathedral style ceilings; 0° - 90°. Requires SPD/DPD and
pole to complete system. |
$ 115.00
|
|
Pole Mount Middle Components / 2" Poles |
|
 |
PLMT-A1 |
Pole Mount Adjustable Pole 2" diameter,
adjustable length of 1' to 2'. |
$ 115.00
|
| PLMT-A2 |
Pole Mount Adjustable Pole. 2"
diameter, adjustable length of 2' to 4'. |
$ 115.00
|
| PLMT-A3 |
Pole Mount Adjustable Pole. 2"
diameter,
adjustable length of 3' to 6'. |
$ 115.00
|
| PLMT-A4 |
Pole Mount Adjustable Pole. 2"
diameter,
adjustable length of 4' to 8'. |
$ 165.00
|
| PL2-SPEC |
Fixed Pole Length 2" diameter x XX"
long List $26 plus $1.00 per foot |
|
|
Misc Accessories |
| |
RB-001 |
RackBack Mount 1 RU EIA 19" rail to
rack mount other equipment on the rear of a plasma mount. |
$ 52.50
|
| RB-002 |
RackBack Mount 2 RU EIA 19" rail to
rack mount other equipment on the rear of a plasma mount. |
$ 68.50
|
 |
RCM |
Rotating Ceiling Mount. Manual rotation
of display. Cannot be used on lift. Requires pole, PCM and
PLMT-T / AA / U / C / CTP2X2 to complete system. |
$ 178.00
|
 |
PS-Kit |
Pole Stabilizing Kit. Attaches to 2"
pole to stablize from three points of structural ceiling.
Uses either wire rope, 3/8" threaded rod or 1" conduit
supplied by installer. |
$ 178.00
|
| PSV-Kit |
Pole Stabilizing / Anti-Vibration Kit.
Attaches to 2" pole to stablize from three points of
structural ceiling. Includes Ainti-Vibration mounting
points. Uses either wire rope, 3/8" threaded rod or 1"
conduit supplied by installer. |
$ 320.00
|
 |
2-15 |
2" to 1.5" reducer - allows PLMT-T / AA
/ U / C / CTP2X2 to be used with 1.5" mounts (2" female to
1.5" male threads). |
$ 50.00
|
 |
15-2 |
1.5" to 2" collar - allows mounts to use
a 1.5" pole (1.5" female to 2" male threads). |
$ 50.00
|
 |
CTR-2-W/B/P |
Ceiling Trim Ring. Magnetic escutcheon
ring for 2" pole. White, black or Primer. |
$ 18.00
|
 |
PP1 |
PowerPro 1. Provides a single gang bell
box for AC power integration via 3/8" or 1/2" conduit.
Designed for above the finished ceiling plenum air space.
Requires PLMT-T, SPD/DPD and pole to complete system. |
$ 199.00
|
 |
PP2 |
PowerPro 2. Provides two single gang
j-boxes for connecting AC power. The PowerPro 2 is located
below the finished ceiling providing AC power in conduit
right at the display Requires PLMT-T, SPS/DPD and pole to
complete system |
$ 199.00
|
